manualshive.com logo in svg

Polaris Ranger RZR 170 2013, Руководство пользователя

Поделиться
Скачать
Polaris Ranger RZR 170 2013 Скачать руководство пользователя страница 46

43

OPERATION

New Operator Driving Procedures 

9. Do not carry a passenger until you have at least four hours of driv-

ing experience with this vehicle. See page 44.

10. Make sure all cab nets are properly secured.

11. Set the parking brake.

12. Place the transmission in neutral.

13. Start the engine.

14. Apply the brakes and shift into gear.

15. Release the parking brake.

16. Check your surroundings. Make sure the area is clear of people and 

obstacles.

17. Keeping both hands on the steering wheel, slowly release the brakes 

and press the throttle with your right foot to begin driving.

18. Drive slowly at first. Practice starting, stopping, turning, using the 

throttle and brakes and driving in reverse. Learn how the vehicle 
handles when making both left and right turns at a slow speed.

19. Increase speed only after mastering all maneuvers at a slow speed.

20. After you become skilled at making turns and begin to operate at 

faster speeds, follow these precautions:

• Avoid sharp turns. Make turns gradually.
• Never turn while applying heavy throttle.
• Never turn the steering wheel abruptly.
• Operate at speeds appropriate for your skills, the conditions and 

the terrain.

• DO NOT attempt to do power slides, “donuts”, jumps or other 

driving stunts.

Содержание Ranger RZR 170 2013



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды