Polaris PRO XD, Руководство пользователя

Страница: 43 / 182

SEAT BELTS
This POLARIS vehicle is equipped with three-point lap and diagonal seat belts
on all seats. Always make sure the seat belts are secured for all riders before
operating. The driver’s seat belt is equipped with a seat belt interlock. Vehicle
speed will be limited to 15 mph (24 km/h) if the seat belt is not secured.
WARNING
Falling from a moving vehicle could result in serious injury or death. Always
fasten your seat belt securely before operating or riding.
To wear the seat belt properly, follow this procedure:
1. For 3-point belts with D loops
w
, pull
the seat belt latch downward and
across your chest toward the buckle
q
at the inner edge of the seat. The
belt should fit snugly across your
hips and diagonally across your
chest. Make sure the belt is not
twisted.
2. Push the latch plate into the buckle
until it clicks.
3. Release the strap, it will self-tighten.
4. To release the seat belt, press the
square red button in the buckle’s
center.
SEAT BELT INSPECTION
Inspect all seat belts for proper operation before each use of the vehicle.
1. Push the latch plate into the buckle until it clicks. The latch plate must slide
smoothly into the buckle. A click indicates that it's securely latched.
2. Push the red release latch in the middle of the buckle to make sure it
releases freely.
3. Pull each seat belt completely out and inspect the full length for any damage,
including cuts, wear, fraying or stiffness. If any damage is found, or if the seat
belt does not operate properly, have the seat belt system checked and/or
replaced by an authorized POLARIS dealer.
4. To clean dirt or debris from the seat belts, sponge the straps with mild soap
and water. Do not use bleach, dye or household detergents.
41
FEATURES AND CONTROLS