Polaris Predator 500 Скачать руководство пользователя страница 50

Страница: 50 / 187

SAFETY

Operator Safety

WARNING

Operating a damaged ATV can result in an accident with serious injury or death. After

any overturn or accident, have a qualified service dealer inspect the entire machine

for possible damage, including (but not limited to) brakes, throttle and steering

systems.

WARNING

Safe operation of this rider-active vehicle requires good judgement and physical skills.

Persons with cognitive or physical disabilities who operate this vehicle have an

increased risk of overturn and loss of control, which could result in severe injury or

death.

CAUTION

Exposure to the hot components could result in a fire. Always keep combustible

materials away from the exhaust system.

Содержание Predator 500




























































































































































































Результаты поиска

Содержание Predator 500

Отзывы:

Бренды по названию

Популярные бренды

Polaris Predator 500, Руководство владельца по обслуживанию и безопасности

Результаты поиска

Содержание Predator 500

Отзывы:

Бренды по названию

Популярные бренды