10
2.6.7 Speed Dialing from the Caller ID Call Log
Use the SCROLL buttons to scroll through the call log.When the desired number
is shown, press the
HEADSET/OHD
button or pick up the handset.
The telephone will dial the displayed call log number.
NOTE: It is possible to completely clear all Phone Book and CLID memories
and reload the telephone's default settings. This however is an irre-
versible action. Press the DELETE button and then both scroll up and scroll
down buttons together.
2.7 Privacy (Mute)
Press the
MUTE
button to turn off the transmission of the speech to the tele-
phone line from the handset microphone in handset mode or headset micro-
phone in headset mode.
Press the
MUTE
button again to resume the conversation with the calling party.
2.8 Call Timer
The call counter will begin approximately six seconds after the NRX-6 goes online
and will show the elapsed time on the display.
2.9 Redial
To redial the last dialed number, pick up the handset or press the
HEADSET/OHD
button, then press the
REDIAL/PAUSE
button. The telephone will automatical-
ly redial the last number dialed. Alternatively, press the
REDIAL/PAUSE
button
while the NRX-6 is offline - the display will show the last number dialed and its
call duration. Pick up the handset or press the
HEADSET/OHD
button. The tele-
phone will automatically dial the last number dialed.
2.10 Pause
If the
REDIAL/PAUSE
button is pressed between numbers, a '
P
' will show on
the LCD to indicate a two second pause in the dialing sequence.
2.11 Recall Facility
The NRX-6 has a Recall facility which is used to access network/PBX services.
To use this facility pick up the handset or press the
HEADSET/OHD
button then
press the
RECALL
button.See Telephone Set-Up for Recall types available and
set-up (section 1.1.4).
NRX-6
-
Display Feature Phone
