- 20 -
Setup
Date & Time
It is important to make sure that the date and time is set correctly as it will affect what date and time
appears on your dash cam footage.
You can either set the date and time up manually or you can choose to set it up so that date and time
syncs with the navigation time.
Important:
If your area has switched over to daylight savings, you will need to change the UTC+ time
accordingly otherwise the wrong date and time may appear on your dash cam footage. Please see below
the correct
daylight savings
UTC+ times:
+11:00 Canberra, Sydney, Hobart, Melbourne.
+10:30 Adelaide.
Once daylight savings has ceased, please change it back to the correct UTC+ time.
Set the correct UTC+ time applicable to your location.
Manual Setting
NG7 User Manual Polaris 16/05/2017 3:40 pm Page 20
