99
MAINTENANCE AND LUBRICATION
Battery
Battery Installation
1. Set the battery in the battery holder.
2. With conventional batteries, install the battery vent tube (sealed
batteries do not have a vent tube).
NOTE:
The vent tube must be free of obstructions and securely
installed. If not, battery gases could accumulate and cause
an explosion. The tube should be routed away from the
frame and body to prevent corrosion. Avoid skin contact with
electrolyte, which can cause severe burns.
3. First connect and tighten the red (positive) cable.
4. Second connect and tighten the black (negative) cable.
5. Attach the battery hold-down strap.
6. Verify that cables are properly routed.
NOTE:
When installing a new battery, make sure it’s fully charged
prior to its initial use. Using a new battery that has not been
fully charged can damage the battery and result in a shorter
life. It can also hinder vehicle performance.
Содержание Hawkeye 2x4
