Polaris GENERAL 2016 Скачать руководство пользователя страница 660 | Manualshive

Страница: 660 / 690

Polaris GENERAL 2016 Скачать руководство пользователя страница 660

11.108

9929375 R02 - 2016-2019

GENERAL

/

GENERAL 4

Service Manual

© Copyright Polaris Industries Inc.

POLARIS MOBILE DIGITAL WRENCH
(PMDW)

Polaris Mobile Digital Wrench (PMDW) is a diagnostic
software application (app) designed specifically for
Android™ devices. When paired with the Wireless
Vehicle Link (WVL), part number PU-51435, PMDW
provides Polaris service technicians with many of the
features and functions found in Digital Wrench.

PMDW Main Page

:

Wireless Vehicle Link (WVL) – Part Number PU-
51435:

To download the PMDW app, navigate your Android
device to www. polarisdealers. com. Locate the Service
and Warranty drop-down menu. Select: “Mobile Digital
Wrench App Download”. Tap on the link to download the
app.

Android Device Minimum Specifications:

• Minimum operating system: Android 3.1 “Honeycomb”

or higher (Android 4.0 or higher preferred)

• Dual core processor / 2 GB internal memory / external

microSD (32 or 64 GB) slot / 500 MB RAM

• Rear facing camera with minimum 3.0 mega pixel

resolution with auto/continuous focus

• Video, Microphone and Voice-to-text capable

• Internet and Bluetooth wireless technology capable

PMDW App Notes:

• PMDW will not work on Microsoft Windows 8™ or

Apple IOS™ products

• Device must be set to allow the installation of non-

market applications

• An electronic user’s guide is provided within the app.

To access the user’s guide, launch the app, and then
click on the “Help” button in the Settings/Preferences
menu.

• Only CAN-based vehicles are compatible with PMDW

and the WVL. A complete list of compatible vehicles
can be found in the user’s guide.

«
...
658
659
660
661
662
...
»

Содержание GENERAL 2016



















































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов