Polaris FS IQ TOURING 2008 страница 39 Скачать руководство пользователя

Страница: 39 / 176

FEATURES

RIDER SELECT Adjustable Steering System

1. Stop the snowmobile.
2. Press the release button and

move the handlebar forward

or rearward to the desired

position.

WARNING

Attempting to adjust the handlebar position while the snowmobile is moving

could result in loss of control and serious injury or death. Always stop the

snowmobile before attempting to adjust the steering system.

WARNING

Do not lubricate the RIDER SELECT mechanism. Doing so could cause loss

of control and result in serious injury or death. The RIDER SELECT mecha-

nism is lubricated for life at the factory.

WARNING

Some aftermarket accessories (including windshields and cargo bags) may

interfere with the handlebar. Such accessories could limit your ability to steer

the vehicle and/or may contact the brake lever. This could lead to loss of con-

trol resulting in serious injury or death. Always be sure that accessories do

not contact the handlebar or brake lever at any steering position and at any

RIDER SELECT position.

Содержание FS IQ TOURING 2008

















































































































































































Результаты поиска

Содержание FS IQ TOURING 2008

Отзывы:

Похожие инструкции для FS IQ TOURING 2008

Бренды по названию

Популярные бренды

Polaris FS IQ TOURING 2008, Руководство пользователя

Результаты поиска

Содержание FS IQ TOURING 2008

Отзывы:

Похожие инструкции для FS IQ TOURING 2008

Бренды по названию

Популярные бренды