background image

1

ChApTEr 1

GENErAL INFOrmATION

In the pages that follow, evantage will provide you with detailed instructions on how to service your 
customers electric bicycles. We will cover both electric and non electric components for the bicycles, how to 
service them, and service program procedure.

TErmS LEFT ANd rIGhT 

the terms left and right in this manual refer to the rider’s point of view when seated on the polaris

®

 electric 

bicycle and facing forward. the right side of the polaris

®

 electric bicycle is the chain side. the left side is the 

brake side.

NOTES, CAUTIONS ANd WArNINGS

the terms 

NOTE, CAUTION

 and 

WArNING

 have specific meanings in this manual. a 

NOTE

 provides addi-

tional information to make a procedure easier or clearer.

CAUTION

 emphasizes precautions that must be taken to avoid damage to tools or the polaris

®

 electric 

bicycle. disregarding a CaUtIon could lead to mechanical damage.

WArNING

 emphasizes a situation where negligence could lead to injury or death. take WarnInGS 

seriously. failure to heed a WarnInG could result in serious personal injury or death.

Controller Cap removal/InStallatIon ......................................................................................... 31

dUo drIve motor ServICe ........................................................................................................................ 32

rear Wheel motor removal .............................................................................................................. 32
rear Wheel motor InStallatIon ....................................................................................................... 33

Smart Controller ServICe .................................................................................................................... 34

Smart Controller removal .............................................................................................................. 34
Smart Controller InStallatIon ...................................................................................................... 35

pro-rIde lIthIUm battery ServICe ....................................................................................................... 35
IC daShboard ServICe ............................................................................................................................... 36

IC daShboard removal.......................................................................................................................... 36
IC daShboard InStallatIon .................................................................................................................. 36

throttle ServICe  ....................................................................................................................................... 37

throttle removal .................................................................................................................................. 37
throttle InStallatIon .......................................................................................................................... 37

IllUStratIon Index ................................................................................................................  38

Servicemanual_101212.indd   4-1

10/12/2012   12:25:44 am

Содержание EV206PH-B























Отзывы: