Instr 9927506
Rev 01 2016-06
Page 2 of 2
IMPORTANT
Your FENDER BAG KIT is exclusively designed for your vehicle. Please read the installation instructions
thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to
ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
ASSEMBLY TIME
Approximately 5 minutes
INSTALLATION INSTRUCTIONS
1. Place vehicle in “PARK”. Turn key to “OFF”
position and remove from vehicle.
2. Open the fender bag and insert screw
w
through
washer
e
and install into fender bag base hole
q
as shown.
3. Install fender bag
q
into cup holder by inserting
screw
w
through the hole in cup holder base.
Install washer
e
and nut
r
from vehicle
underneath. Tighten until snug.
