P/N 9924821 Rev 02 04/14
INSTALLATION INSTRUCTIONS:
1. Place the vehicle in “PARK”. Turn the
key to “OFF” position and remove from
the vehicle.
2. Remove the stock skid plate by
removing 6 mm screws and washers at
ten places. Figure 1.
Figure 1
-2-
3. I
nstall the new rear skid plate using
6 mm X 25 screws and washers at four
locations. Figure 2.
NOTE:
Torque the screws to 15 ft. lbs.
(20.33 Nm).
Figure 2
IMPORTANT:
Your Polaris SKID PLATE KIT is exclusively designed for your vehicle. Please read the
installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and
free of debris. For your safety and to ensure a satisfactory installation, perform all installation steps
correctly and in the sequence shown.
Screw
Screw
Rear Skid Plate
