Polaris 2014 Sportsman 550 EPS Скачать руководство пользователя страница 73

Страница: 73 / 160

WINCH GUIDE

These safety warnings and instructions apply if your vehicle came
equipped with a winch or if you choose to add an accessory winch to
your vehicle.

Improper winch use can result in SEVERE INJURY or DEATH. Always follow all
winch instructions and warnings in this manual.

Your winch may have a cable made of either wire rope or specially
designed synthetic rope. The term “winch cable” will be used for either
unless noted otherwise.

Winch Safety Precautions

1. Read all sections of this manual.

2. Never use alcohol or drugs before or while operating the winch.

3. Never allow children under 16 years of age to operate the winch.

4. Always wear eye protection and heavy gloves when operating the

winch.

5. Always keep body, hair, clothing and jewelry clear of the winch

cable, fairlead and hook when operating winch.

6. Never attempt to “jerk” a load attached to the winch with a moving

vehicle. See the

Shock Loading

section on page 80.

7. Always keep the area around the vehicle, winch, winch cable and

load clear of people (especially children) and distractions while
operating the winch.

8. Always turn the vehicle ignition power OFF when it and the winch

are not being used.

9. Always be sure that at least five (5) full turns of winch cable are

wrapped around the winch drum at all times. The friction provided
by this wrapped cable allows the drum to pull on the winch cable
and move the load.

10. Always apply your vehicle’s park brake and/or park mechanism to

hold the vehicle in place during winching. Use wheel chocks if
needed.

WARNING

Содержание 2014 Sportsman 550 EPS

































































































































































Результаты поиска

Содержание 2014 Sportsman 550 EPS

Отзывы:

Похожие инструкции для 2014 Sportsman 550 EPS

Бренды по названию

Популярные бренды

Polaris 2014 Sportsman 550 EPS, Руководство пользователя

Результаты поиска

Содержание 2014 Sportsman 550 EPS

Отзывы:

Похожие инструкции для 2014 Sportsman 550 EPS

Бренды по названию

Популярные бренды