Polaris 2014 550 INDY 144 Скачать руководство пользователя страница 26

Страница: 26 / 122

SAFETY

Safety Labels and Locations

Operation Warning

WARNING

• To avoid serious injury or death, read and understand all warnings and the

Owner's Manual before operation. If manual is missing, contact a POLARIS
dealer for a replacement.

• This vehicle is capable of high speeds. Buried objects or uneven terrain can

cause loss of control. Reduce speed and use extreme caution when operat-
ing in unfamiliar terrain.

• Excessive speed, especially at night or with limited visibility, can result in

insufficient time for you to react to terrain changes, to avoid unexpected
obstacles, or to stop safely.

• Never consume alcohol or drugs before or while operating this vehicle.

• In an emergency, push down the Auxiliary Shut-Off Switch, located on the top

of the throttle control assembly, to stop the engine. Then pull the brake lever
to stop.

• Always wear an approved helmet, eye protection, and adequate clothing

while operating this vehicle.

• This vehicle is designed for adult use only. Check local laws for age require-

ments.

(continued on next page)

Operation Warning

Содержание 2014 550 INDY 144



























































































































Результаты поиска

Содержание 2014 550 INDY 144

Отзывы:

Polaris 2014 550 INDY 144, Руководство пользователя, Страница: 26 / 122

Результаты поиска

Содержание 2014 550 INDY 144

Отзывы: