Polaris 2010 Kingpin, Руководство пользователя

Страница: 51 / 167

47
Pre-Ride Inspections
Engine Oil Level
The oil fill cap/dipstick is located on the right side of the vehicle. We rec-
ommend the use of only VICTORY brand Semi-Synthetic 20W-40 Motor
Oil or an equivalent oil designed for use with wet clutches (such as those
with a JASO MA rating).
NOTICE: Operating the engine with too much or too little oil can cause serious
engine damage or engine seizure, which could result in loss of control
and serious injury or death. Do not operate the motorcycle with the oil
level above the FULL mark or below the ADD mark.
Tip: The engine must be at normal operating temperature when checking the oil
level.
1. Place the transmission in neutral. Start the engine and allow it to idle
for several minutes.
2. Stop the engine and wait 3-5 minutes before checking the oil level.
3. On level ground, straddle the motorcycle and bring it to the fully
upright position.
4. Remove the oil fill cap/dipstick and wipe it clean. Reinstall the dipstick
and turn the cap clockwise until it seats.
5. Remove the dipstick and view the oil level. Add or remove oil as
needed to bring the level into safe operating range (between the FULL
and ADD marks) on the dipstick.
6. Repeat steps 1 and 2 each time you adjust the oil level.
Safe Range
{
Oil Fill
Cap/Dipstick