Polaris 2008 Outlaw 50 Скачать руководство пользователя страница 61

Страница: 61 / 199

Driver Warnings

WARNING

POTENTIAL HAZARD

Stalling, rolling backwards or improperly dismounting while climb-

ing a hill.

WHAT CAN HAPPEN:

The ATV could overturn and cause injury.

HOW TO AVOID THE HAZARD:

Maintain steady speed when

climbing a hill.

If you lose all forward speed:

Keep your weight uphill. Apply the

front brakes gradually (right lever). When fully stopped, apply the

rear brake as well (left lever) and then lock the parking brake.

If you begin rolling backwards:

Keep weight uphill. Never apply engine power. Never apply the rear

brake while rolling backwards. Apply the front brake slowly. When fully stopped, apply rear brake as

well, and then lock the parking brake. Dismount on uphill side, or to either side if pointed straight

uphill. Turn the ATV around and remount, following the procedure described in the Owner's Manual.

See page 102.

Содержание 2008 Outlaw 50








































































































































































































Результаты поиска

Содержание 2008 Outlaw 50

Отзывы:

Polaris 2008 Outlaw 50, Руководство пользователя, Страница: 61 / 199

Результаты поиска

Содержание 2008 Outlaw 50

Отзывы: