51
OPERATION
All Wheel Drive (AWD)
Your Polaris
RANGER
(4x4 and 6x6) is equipped with an exclusive
Polaris All Wheel Drive (AWD) system that can be activated by a
switch on the console. When the switch is off, the
RANGER
is in
two-wheel drive at all times. When the switch is on, the
RANGER
is in
AWD, and the front wheels will automatically engage anytime the rear
wheels lose traction. When the rear wheels regain traction, the front
wheels will automatically disengage.
The AWD switch position indicates whether the vehicle is in AWD.
There is no limit to the length of time the vehicle may remain in AWD.
The AWD switch may be turned on or off while the vehicle is moving.
If the switch is turned off while the front hubs are driving, they will not
release until the rear wheels regain traction.
Disengaging AWD
Under certain conditions, it may be possible for one or both hubs to
remain engaged unnecessarily. This condition causes increased steering
effort and some vehicle speed restriction.
Take the following steps to disengage the AWD system:
1. Stop the vehicle.
2. Shift to reverse and back up a minimum of 10 feet.
3. Stop completely.
4. Shift into forward and drive.
If the hubs remain engaged after following these instructions, return the
vehicle to your dealer for service.
Switching to AWD while the rear wheels are spinning may cause
severe drive shaft and clutch damage. Always switch to AWD
while the rear wheels have traction or are at rest.
CAUTION
Operating with only one front hub engaged could result in loss of
control, accident, and severe injury or death.
When hub engagement symptoms are present, use the disengaging
procedure before proceeding.
WARNING
Содержание 2004 RANGER 2x4
Страница 8: ...6...
Страница 54: ...52 NOTES...
Страница 61: ...59 MAINTENANCE AND LUBRICATION Lubrication Recommendations 1 2...