background image

10

UK

Control panel 

message/code

Meaning

Required action

RTC

Clock error

Re-set date and time. For details, see “Section 

12.1: Service” in the controller manual supplied 

with the appliance

CABINET PROBE

Cabinet probe error

•  Check that the probe is undamaged

•  Check the device-probe connection

•  Check the cabinet temperature

•  If problem persists, Call POLAR agent or 

qualified technician.

EVAPORATOR PROBE

Evaporator probe error

Same as for the cabinet probe error but with 

reference to the evaporator probe

CONDENSER PROBE

Condenser probe error

Same as for the cabinet probe error but with 

reference to the condenser probe

NEEDLE PROBE 

SENSOR 1/2/3

Needle probe/sensor 1/2/3 

error

Same as for the cabinet probe error but with 

reference to needle probe 1/2/3

NEEDLE PROBE

Needle probe alarm (all 

the needle probe sensors 

enabled are in alarm 

status)

Same as for the cabinet probe error but with 

reference to all the needle probes

NEEDLE PROBE 

INSERTION

Needle probe not inserted 

alarm

Check that the needle probes have been correctly 

inserted

DOOR OPEN

Door open alarm

Check the door status

HIGH TEMPERATURE

Maximum temperature 

alarm (HACCP alarm)

•  Check the cabinet temperature

LOW TEMPERATURE

Minimum temperature 

alarm (HACCP alarm)

•  Check the cabinet temperature

POWER FAILURE

Power failure alarm (HACCP 

alarm)

Check the device-power supply connection

Note: This table just lists very basic alarms. For more detailed alarm information, please 

see “Section 15 Alarms” in the controller manual. 

Technical Specifications

Model

Voltage

Power

Capacity

Weight

(kg)

Temp. range

Refrigerant

Dimensions

H x W x D

UA014

230V~ 

50Hz

700W

3 x GN1/1

104

+5°C ~ -35°C

R290 150g

965 x 804 x 826

UA015

230V~ 

50Hz

720W

5 x GN1/1

116

+5°C ~ -35°C

R290 150g

1035 x 804 x 826

UA016

230V~ 

50Hz

900W

10 x GN1/1

150

+5°C ~ -35°C

R290 150g

1885 x 800 x 815

UA014-UA015-UA016_UK_A5_v1_20200113.indb   10

2020/1/13   16:31

Содержание UA014

















Отзывы: