C 49
If there is - - / 00 reading
on the display, there is no heart rate reception.
Bring the wrist receiver up to your chest near the transmitter’s Polar logo.
The receiver starts looking for the heart rate signal again.
In the beginning of your exercise, when it has lasted less than 60
minutes, the exercise time is displayed in minutes and seconds. When
you have exercised more than 60 minutes, the exercise time is displayed
in hours and minutes.
Turning the heart rate zone alarm on/off
Note that you can not use the alarm when Bycicle functions are on.
Note that trip distance is reset by pressing and holding signal/light
button. Therefore Trip should not be displayed in the upper row when
turning zone alarm on/off.
Press and hold the signal/light button.
When appears on the display the zone alarm is on. You will hear a beeping
sound with each heartbeat if your heartbeat is outside the heart rate limit.
If you do not want to use the zone alarm the flashing heart rate reading
indicates if your heartbeat is outside the heart rate limit. This function can
be used if you have set heart rate limits on for Interval Training Set or
BasicSet.
In addition to the alarm you can see:
if you are exercising above heart rate zone.
if you are exercising below heart rate zone.
Содержание S710i
