Polar Electro Polar3D, Руководство пользователя

Страница: 118 / 170

CHAPTER 7. TROUBLESHOOTING FOR POLAR3D PRINTERS 109
A summary of the meaning of the LED lights on these Po-
lar3D printer is:
1. POLAR3D (BLUE over BLUE): The printer has finished
turning on, but is not connected to a network, and has
stood up its own wireless network.
2. POLAR 3D (BLUE over RED): The printer has been con-
figured to connect to a network, but that network has not
yet, or could not, be found. (The LED lights will only re-
main BLUE over RED for a short time: then the lights
will either return to BLUE over BLUE if the network could
not be found, or progress to BLUE over YELLOW if the
network is found.)
3. POLAR 3D (BLUE over YELLOW): The printer found a
network to which it could connect, but the printer has not
connected.
4. POLAR 3D (BLUE over WHITE): The printer is connected
through the local network and the Internet to the Polar
Cloud.
5. POLAR 3D (BLUE over GREEN): The printer has begun
an update.
1
6. PO LAR3D (BLUE over GREEN): The printer is partway
through an update.
7. POLAR3D (GREEN): The printer has just completed an
update. (The LED lights will only remain solid GREEN
for a short time; then the LED lights will return to their
1
The green color will move gradually upwards in the letters, until all the LED lights
are green as the update completes, after which the LED lights will return to their normal
color from before the update.