Polar Electro CS600X, Руководство по началу работы

Страница: 16 / 31

Start Training
Wear the heart rate sensor and attach the cycling computer to the
bike mount.
1. Start heart rate measurement by pressing OK. The cycling
computer goes into pause mode.
2. Select the bike you are going to exercise with. Bike 1 is set as a
default. Select
Settings > Bike > Bike1 > OK. Select Other if
you only want to record heart rate.
3. Within four seconds, your heart rate appears on the display. The
frame around the heart symbol indicates that transmission is
coded. Depending on the sensor you are using, the cyclist or GPS
symbol (or both) on the bottom left-hand corner of the display
flashes until all the sensors are found.
4. Start exercising by pressing OK. The exercise type is displayed in the upper left-hand corner.
5. Pause exercise recording by pressing STOP. To stop recording completely, select EXIT.
To fully operate the different settings choose Settings . For further information on settings, consult the
user manual.
E N G L I S H
16 Training