6
POL
AR
. M
ADE
IN
N
OR
RL
AN
D.
Scroll to the right or left until it says EXT and then
hit the return arrow.
Open Polar connect and make sure that heaster
is on and then set the desired temperature down
below.
Note! It’s not possible to change the temperature
over the value you put in the aldepanel. For ex-
ample, if the Alde display is set on 24 degrees, you
cannot go over 24 degrees in the application.
Turn off the Aldepanel and this text should show,
and after a few seconds the display will become
dark.