Important:
•
Do not use water with any chemical additives. The water must be cold
or cool, do not use hot water above 40'C.
•
Do not fill water above the ' MAX ' line indicated on the Water Tank.
Maintenance and care
If proper care is not taken, filters may be infested with fungus and moulds. For maintenance of the
product, you MUST clean the filter and water tank in dry area before long term storage.
It is always recommended to regularly clean the filter and the water tank for healthier usage.
Make sure to clean the filter when you see signs with musty ordo and mould build ups in the filter.
Preventing mould build ups in the Evaporative Cooler
Always check the Humidity level, as the Evaporative cooler is most effective on dry areas.
Running evaporative cooler mode on humid days will prevent evaporation through the cooling pad
causing higher chance of mould build ups.
Tips to Clean the filter?
Remove the filter (cooling Pad) from the unit and submerge the filter into a mixture of lemon Juice
and water for 40 Seconds. Gently with soft brush remove the mould, then in clean running water,
Rinse the filter. Leave the filter to be completely dry before usage.
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
