Technical specification / user manual T2-PVSP16
2 / 3
ATTENTION!
The board is an electronic device and it requires careful handling!
I. General use
The 2-digit board is designed to display the distance from 0 to 80 cm to the “0” line in pole vault event.
II. Technical specification
Code
T2-PVSP16
Type
LED PV stand position board
Power supply AC [V]
230
Power consumption [VA]
50
Frontal cover
solid polycarbonate
Display type
LED
Display colour
red
Digit height [cm]
25 cm
Good visibility [m]
100 m
Maximum visibility [m]
125 m
Displayed information
from 00 to 99
Max view angle [°]
120
Weight [kg]
10
Casing
aluminium, powder painted, for outdoor
Temperature range
from -10°C to +50°C
Set contains
tripod, counter control keypad
III. Assembly
1.
Set up the LED board near an officials table at pole vault facility.
2.
Unfold the tripod.
3.
Install the LED board on the tripod profile.
4.
Connect the LED board to the power supply.
5.
The LED board tests led display units (all segments light up for about 2s).
6.
It is ready to use.
IV. Operating
Operate the LED board display with the handheld keypad:
a)
press
+/-
to set the desired value
b)
press
CLEAR/KASUJ
to reset the display.
V. Storage and Maintenance
The display board is an electronic device and it requires careful handling. During idle periods it must be stored in
a roofed and dry place. Before cleaning, disconnect the power cord. Wipe the front panel with a soft cloth or an agent
for cleaning polycarbonate surfaces.