Technical specification/Assembly manual
T-12268-D
2/10
Thank you for choosing POLANIK landing area.
Safe assembly and use
•
ATTENTION! VACCUM PACKED PRODUCT – UNPACK IMMEDIATELY AFTER DELIVERY
•
Before you start to assemble and use the landing area please read this manual carefully and store the
manual in a safe place for further reference. Polanik Sp. z o. o. shall not be liable for any cage damages
which are the result of the failure to follow this manual.
•
Unauthorized copying of this manual, in whole or in part, is prohibited.
•
The contents of this manual are subject to change without notice.
•
Warning! The sports equipment produced by Polanik Sp. z o. o. is designed for athletics training and use in
sports competitions only. Please pay special attention when using the product, misuse of athletics
equipment can cause serious injury or in extreme cases even death. That is why training and use during
sports events have to be always supervised by authorized sports personnel. In no event shall Polanik Sp. z o.
o. be liable for any special, incidental, indirect or consequential damages in connection with the purchase or
use of POLANIK products or costs over the original cost of the product.
•
Specific warranty terms:
1)
The use of the landing area outdoors requires a waterproof cover and a landing area platform for
proper insulation from the ground. Failure to follow the above restrictions results in the loss of the
warranty rights.
2)
The top pad of the landing area is equipped with a spike resistant mesh fabric. The mesh fabric is
designed to protect the landing area against spikes used by jumpers. While landing and walking on the
top pad the spikes go through the mesh fabric and do not damage the surface. One must not shuffle
the spikes on the mesh fabric, because under high crosswise stress caused by moving the spikes
without lifting the feet, it may happen that the top pad will be torn. The damages of the top pad
caused by careless sliding the pikes on the top pad surface are excluded from the warranty and can be
removed in course of payable repair or replacement of the landing area elements.