Instruction manual
MDHJ-3 MDPV-8
3/4
II. Assembly
1.
Unpack the device (item 1) and the measuring plate (item 2).
2.
Unscrew the hand wheel (item 3).
3.
Screw the measuring plate (item 2) to the device (item 1) with the hand wheel (item 3)
4.
The product is ready for use.
III. Operation
1.
Slid out the telescope profiles slowly, DO NOT pull out the segments fast and rapidly.
2.
Position the device on the ground in front of the landing area, in the middle of the crossbar.
3.
Place the measuring plate tip over the crossbar and adjust the length of the segments , so that the tip
touches the crossbar edge.
4.
Use the green line to read out the height.
IV. Maintenance
1.
The product is to store in dry place in room temperature.
2.
Keep the product away moisture – if the water gets inside the segments, it may damage the product.
2
1
3
