Technical specification/Assembly manual
HR-12 HR-12-W
3/4
IV. Assembly
The HR-12 rack should be screwed using M6x35 screws and pads Ø8. The rack HR-12-W should be screwed in the way
the picture below shows.
V. Operation and maintenance
The rack should be stored in a roofed and dry place.
Even the best technical solutions cannot substitute for common sense. The usage of the product must take place
under the supervision of qualified trainers. The producer shall not be liable for any incidents caused by the improper
product installation, assembly or its misuse. The producer reserves the right to introduce without warning changes in
product constructions and colours.