Polair Systems portable air compressor Скачать руководство пользователя страница 7

   

             

SAFETY WARNINGS      

 

 

Read and Understand all Safety Warnings before using Air Compressor 

 

Hazard Level 

  

 

 

Flying objects 
 

 

  

Warning 

Risk of Unsafe 
Operation 

  

 

  

  

  
 
 
 

 

  

Caution 

Risk of Damage 
to Air 
Compressor or 
Property 

 
 

 
 

 
 
 
 

Potential of Hazard

 

 
Serious injury may occur from 
loose debris being propelled at 
high speeds from the compressed 
air stream. 
 
 
 
 
 
 

 
Serious injury or death may occur 
to you or others if air compressor 
is used in an unsafe manner. 
 
 
 
 
 
 
 

 
 
Failure to transport or operate the 
air compressor properly may result 
in major repair expenses. 
Oil leaks will damage carpets, 
painted surfaces, flooring, and 
other items. 

 
 
 
 
 
 

How to Avoid Hazard 

 

 
Always wear OSHA required “287” safety 
glasses to protect the eyes during 
operation of the air compressor.  Never 
point the air stream or tools at any point 
of your body, other people, or animals.   
Always turn off the air compressor and 
drain tank pressure completely before 
attempting maintenance, or attaching air 
tools. 
 

 
Review and understand all instructions 
and warnings in your owner’s manual.  
Know how to stop the air compressor.  Do 
not operate until you are thoroughly 
familiar with all of the controls.  Do not 
operate the compressor if fatigued or 
under the influence of alcohol or drugs.  
Stay alert while operating the 
compressor, and pay close attention to 

he task at hand. 

t

 
 
Check oil levels daily and maintain proper 
oil levels.  Always run compressor in a 
level, secure position, that keeps it from 
tipping or falling during use.  Do not 
operate without an air filter or in a 
corrosive environment. 
Always transport in a level position and 
use protective mats to keep truck beds 
clean, etc.  Check drain bolts regularly 
and do not overfill machinery with oil. 
 
 
 

Please note that this product may not be equipped with a spark arresting muffler.  If the compressor is operated 
around flammable materials or agricultural crops, brush, forests, and grasslands an approved spark arrestor must be 
installed, maintained, and in good working order. An approved spark arrestor is legally required in the State of 
California under sections 4442 and 4443 of the California Public Resources Code Statute section /30050.   
 
This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, and 
other reproductive harm.  Always wash hands after handling this product. 

Содержание portable air compressor
















Отзывы: