
How to use PoPendant and PoKeys in Mach
11
www.poscope.com
In these window all settings will be done. Please click Peripherals -> LCD test or press F3 on your
computer's keyboard.
In following window basic LCD settings are done: Number of rows, Number of columns, Enable LCD
support, Secondary pins.
We choosed 4x20 characters LCD, Connected as secondary LCD. After that click on »Initialize LCD«
button. Close window and if you followed manual, you should see something like these:
As seen on the picture, active pins are 28 – 34. At the end configuration must be saved to PoKeys
with »Send to device button« and close PoKeys software.