How to install a back rest on a Martini
1.
110mm
3.
2.
4.
The tools needed for instalation are:
Drill with 5,5mm drill bit
#10 spanner
Flat screw driver
Scissors
The backrest package should include:
1 Plastic backband
1 Point65 backrest No 2B
2 x Screw JIS-M6x25mm
2 x 6mm washers
2x 6mm nut
5,5mm shock cord
Measure the distance from the bulkhead on the side
of the kayak as on the image above. Make sure the
holw is centered. Do it again on the other side.
The drill should go though both layers of the cockpit
Use a 6mm drill to make the hole on each side of
the cockpit.
Prepare the backrest by pushing the backband
though the posket on the back of the back rest. Make
sure the plastic back band has the nice side forward.
Содержание martini
Страница 1: ...Back rest installation guide ...
