POFUNG BF9500, Руководство пользователя

Страница: 14 / 38

BF9500
车载台使用说明书
①
In VFO mode, press the key, the frequency of the screen display area MHZ digital flicker.
② Turning the knob to select the required value MHz. Main knob clockwise control increases MHZ, rotate
counterclockwise to reduce MHZ. Rise and fall MHZ or use hand microphones F key values.
③ Press any key to set the selected frequency and return to normal VFO mode
.
3
）
Incoming Frequency
① In standby mode, press the key, switch to VFO mode.
·Must be in VFO mode to use.
②
Press numeric keys ([0] to [9]) enter the required frequency (the three decimal point as the MHZ, three decimal places for
KHZ).
9. Channel memory 信道存储
1）
Frequency to save channel
：
①
Under frequency mode (VFO), turn selector knob to select the desired frequency or input frequency by MIC's numeric keys
；
④
Press Key,LCD appears F, channel number icon flashing
；
⑤
Press key to enter CTCSS/DCS signaling setup, turn selector knob to select the desired signaling
；
④
Turn selector knob to select the desired channel number to store;
⑤
Press key, ,
F
icon and channel number disappears and emit a prompt voice, thus the channel storage succeed.
2
）
Channel storage channel
信道存信道：
①
Under channel mode
，
turn selector knob to select the desired channel
；
②
Press Key,LCD appears F, channel number icon flashing
；
③
Turn selector knob to select the desired channel number to store
；
④
Press key, ,
F
icon and channel number disappears and emit a prompt voice, thus the channel storage succeed .
10. Channel Delete
删除信道
1
）
Under channel mode, turn selector knob to select channel which you want to delete
；
2
）
Short press the key, then press the key, the screen appears SURE?Short press again, current channel will be
deleted and emitted a prompt voice.
11. Transmitting Tone-Pulse
发射中转导频频率（即单音脉冲）
Press and hold [PTT] key, then press Microphone key to transmit 1750Hz tone-pulse signal
；
loosen the key to cancel
the transmit 1750Hz tone-pulse signal .