poewit.com
INSTALLATION AND SETUP
1
WARNING
BEFORE PROCEEDING, EXAMINE AP MOUNTING TO ENSURE THERE
IS AN AIR GAP BETWEEN THE BACK OF THE AP HOUSING AND THE
MOUNTING SURFACE. AIR FLOW IS IMPORTANT TO MAINTAINING A
LOW TEMPERATURE.
1) After mounting the WAP-1, connect an Ethernet cable (Cat5/6)
from the LAN1 port to the Router.
• Note: To achieve full power and wireless transmission, ensure
the PoE source is 802.3bt. Features will be limited when using
802.3at.
• Note: A blue LAN1 LED indicates a link of 2.5Gbps. An amber
LED indicates a link of 100/1000Mbps.
2) To configure the device, download the PoEWit App from Google
Play or the Apple App Store.
