PocketBook 302
User Manual
39
1.
S
ET THE DEVICE NAME
a)
tap the corresponding line;
b)
an on-screen keyboard appears.;
c)
enter the name that will be used to connect POCKETBOOK 302 with other devices;
d)
click
Enter
to save made changes and
Х
to hide on-screen keyboard.
2.
S
ET THE MODE OF NETWORK ACCESS
Tap this line in the list of connection parameters, and select one of the following modes:
off,
on, or
permission request.
3.
C
HOOSE PREFERRED CONNECTION
All available connections will be listed in pop-up list. Select the desired one.
4.
S
ET
PIN-
CODE FOR CONNECTION
P
OCKET
B
OOK WITH OTHER DEVICES VIA
B
LUE
T
OOTH
a)
Tap the inscription Bluetooth PIN
b)
an on-screen keyboard appears.;
c)
enter PIN-code of four characters for connection via Bluetooth;
d)
click
Enter
to save made changes and
Х
to hide on-screen keyboard.
5.
C
ONFIGURE
GPRS-
CONNECTION
a)
Open list of GPRS-connections and select the one you want to configure. By default the
not configured connections are called <GPRS Connection No>.
b)
Tap
Connection name
; an on-screen keyboard appears; the name that will be used to
connect POCKETBOOK 302 with GPRS-device; than click
Enter
to save made changes,
and
Х
to hide on-screen keyboard.
c)
Click
Connect via
and
select from the list a device with set Bluetooth-connection
.
d)
Similar to Connection name enter the name of
Access point ANP
,
user name
and
password
.
e)
Set the time for Shutdown if no activity: Tap on
Shutdown if inactive (minutes)
and
select from the list the desired time.
f)
Open the item
Network parameters
, tap the
Configuration of IP
address, and select
the following from pop-up window:
Auto or
manually.
g)
Configure proxy. To do this, enter the menu Proxy Settings and using on-screen
keyboard set all the parameters of proxy connection:
Proxy-server
Proxy-port
Proxy users' name
Proxy password
h)
Finally, verify the connection setup. To do this, tap on
Connection test
. A dialog
window "Connection setup" appears. If connection is failed you can view the event log.
6.
C
ONFIGURE THE WIRELESS CONNECTION
WIFI
a)
Open list of wireless connections and select the one you want to configure. By default
the not configured connections are called <wireless Connection No>.
