EN
4
OTHER FUNCTIONS
Auto recording:
When the vehicle’s engine is on, the DVR lights up and starts recording automatically. When the vehicle engine
stops, the DVR automatically saves the recording and turns off. The video file will be saved on the micro SD
card. If the card is full, the system will overwrite older files.
Notes:
•
The length of the video files can be set in the menu. Options: 1/2/3 minutes.
•
The video files are saved in the Normal folder on the SD card as: FILE + Date + Time. MOV
•
If Cyclic Registration is disabled, the DVR will not record if the SD card is full.
Manual recording:
By long pressing the Power button, the DVR will turn on and will start recording automatically. Short press OK
to stop recording and OK again to restart it. By pressing the power key, the DVR will save the recording and
close.
Integrated Collision Sensor (G-Sensor)
Go to the System settings menu and scroll to the Protect level menu. Set the collision sensitivity. By default,
this function is active on the sensitivity level 3.
In the event of a serious collision, the DVR will block the current recording, the previous and next one. These
recordings will be saved in the Event directory. The files in this directory will not be overwritten at the cyclical
record.
Set date and time
Go to the System Settings menu until you reach Data Format. In order to ensure the accuracy of recorded files
in case of collision, we recommend that you set the correct date and time.
Connect to PC
Connect the DVR of a computer through a USB data cable. The screen displays 3 options: MSDC, PC camera
and Video mode.
Play video and photo files
Long press the Menu / Mode key until you reach the file playback interface. Select a file, press the OK key to
play it, or press Menu / Mode to access the available options (Volume, Protection, Delete, Video File Type).
Press the Menu / Mode key again to return to the list of files.
