6
7
Windshield Installation
–
Power Cord Operation (use Bracket B)
1.
Adjust mounting bracket.
Bend the angle of the metal bars of the windshield bracket B to set
the best viewing and detection angle, ensuring the radar detector is level with the road.
2.
If suction cups are not installed in the bracket,
insert the nipples of the suction cups into the
windshield bracket.
3.
Secure to windshield.
Press the bracket firmly against the windshield until the suction cups
take hold securely.
4.
Mount the radar detector
onto the plastic piece at the end of the bracket. You will hear a “click”
when the two parts are properly connected.
5.
Power-up.
Plug the small end of the coiled power cord into the power jack on the side of the
radar detector. Plug the large end of the power cord into the power socket of your vehicle.
INSTALLATION
