PNI Sensoro Alpha+, Руководство по эксплуатации

Страница: 7 / 24

5
Windshield mounting
1. Install the suction cups onto the windshield mounting
bracket by sliding them into their holes (if not pre-
installed).
2. Press the bracket base firmly against the windshield until
the suction cups securely take hold.
3. Slide the detector into its slot located on the top back of
the detector.
Dashboard
Windshield
4. Bend the angle of the windshield mounting bracket, if
necessary, to adjust for best viewing and detection angle.
5. Plug the small connector of the power cord into the
12-volt DC power input jack located on the side of the
detector.
6. Plug the lighter adapter into the lighter socket.
INSTALLING THE UNIT