PNI Sensoro Alpha, Руководство по эксплуатации

Страница: 13 / 28

11
Highway/city mode selection
Press the
CITY
button repeatedly for less than two seconds
each time to toggle through five signal sensitivity modes.
They are highway, city 1, city 2, city 3, and city 4. Each mode
is indicated by blinking “H” or “C” LED, with or without a
numbered LED. For city 2, 3, and 4 modes, the SENSORO
TRAVELLER II/TRAVELLER II+ takes turns blinking “C”
LED and a numbered LED one after the other. See following
illustrations:
Highway mode
H C X K Ka L 2 3 4 M
City 1 mode
H C X K Ka L 2 3 4 M
City 2 mode
H C X K Ka L 2 3 4 M
City 3 mode
H C X K Ka L 2 3 4 M
City 4 mode
H C X K Ka L 2 3 4 M
X-band, occupied by police radar, is also shared for other
uses, such as automatic door openers like the ones used
at supermarkets, burglar alarms, terrestrial microwave
emission, RF braking systems, and other devices. In
addition, other radar detectors in close proximity may
falsely alert your detector. To reduce false alerts, the
SENSORO TRAVELLER II/TRAVELLER II+ has four
city filtering settings. Each move (from highway to city 1,
city 1 to city 2, city 2 to city 3) will give you the rejection
of X-band alarms by approximately 20%.
RADAR OPERATION