5
-
The number of packets received.
-
The calculated PER in %.
-
The maximum and minimum RSSI values in this PER test
RSSI is received signal strength indication. For the detail of the RSSI value,
please refer UZ2400 RF chip’s datasheet.
1.1.2
Continuous TX / Pseudo Noise
The menu item “3” initiates the modulates RF transmission. The data carried
are pseudo random numbers.
1.1.3
Continuous RX / Pseudo Noise
The menu item “4” initiates the carrier RF transmission.
1.1.4
RX mode
The menu item “5” initiates the receiver mode.
1.1.5
IDLE mode
The menu item “6” sets the UZ2400 into the IDLE mode.
1.1.6
Sleep mode
The menu item “7” sets the UZ2400 into the Deep Sleep mode.
1.1.7
Standby mode
The menu item “8” sets the UZ2400 into the Standby mode.
1.1.8
RF Channel Setting
