EN
4
4. ADD DEVICE
4.1 QR code net-pairing (Recommended)
The product only support 2.4GHz Wi-Fi network. It does not support 5GHz Wi-Fi network. Before
configuring Wi-Fi, please set the router parameters. The Wi-Fi password should not contain special
characters of ~!@#$%^&*(). When configuring Wi-Fi, make sure your router, mobile and device are as close
as possible for a quick configuration of the device.
Connect smartphone to this Wi-Fi router with internet access. Activate location from phone ito continue.
● App supports QR code net-pairing and Wi-Fi AP connection. You can choose to add device by other
options.
● Power On the camera, and you can hear the broadcast “Beep . .Beep . . ”, (if you heard nothing at all,
please click and hold “reset” button on back of camera for 20 seconds to restore factory settings).
● When the mobile phone connecting to Wi-Fi, click “Add Device” or “+“ icon (figure 1) on the Home screen
of the App, select “Security & Sensor”(figure 2)→ “Smart Camera”, click “next step” (figure 3).
Enter Wi-Fi account and password, click “Confirm” (figure 4).
Figure 1 Figure 2
Figure 3
Figure 4