5
3) Press the
CLOCK
key to set the HOUR
4) Press the
TIMER
key to set the MINUTE
5) Press the
SET
key once to confirm the time
The display will show either 12 or 24 to indicate clock display mode
6) Press the
CLOCK
key to change between 12 or 24 hour display mode
7) Press the
START
key to confirm the clock setup
5)
Setting the Feed Time and Number of Feedings per Day
1) Press the
TIMER
key to display the feeding-time
2) Press and hold (for 2 seconds) the
SET
key until Digit-3 & 4 start flashing
The display will show the 1
st
feeding time. Example:
(1 07)=(1st feeding at 7am)
3) Press the
TIMER
key to set the desired HOUR for feeding. Note the (P) in the
top left corner for PM using 12 hour time
4) Press the
SET
key to confirm your setting and proceed to the 2
nd
feeding time
5) Repeat step-3 to set the desired hour for feeding the SECOND feeding time
6) At this point if you want to only feed 2 times per day Press the
START
key and
your finished
The last feeding-number shown is the number of times to feed per day.
The timer will now automatically start and the TIMER icon will turn
ON.
7) If you wish to feed a 3
rd
or 4
th
time each day do NOT press the
START
key and
repeat from step-3
Tip:
If you pressed the
SET
key a 3
rd
time, but you did not want to feed 3 times
per day, just press the
TIMER
key and then press and hold the
SET
key (for 2
seconds) to start over, remember not to press the
SET
key after the second
feeding, press the
START
key to end your number of feedings per day.
Note:
a) If all four feeding-times have been set, the process will terminate and the
schedule will start automatically. The next feeding time will then be displayed.
(If only 1 feeding-time has been set then the feeding-timer display will not
change even if you press the
TIMER
key.)
b) Feeding-times must be set in ascending order otherwise the remaining
number of the feeding(s) will not be served.
6)
Setting the Volume/Portion-Size
1) Press the
VOL
key to display feed-volume/portion-size
2) Press and hold (for 2 seconds) the
SET
key until Digit-4 flashes
3) Press the
VOL
key to set the desired volume/portion-size
