11
User manual
Engl
is
h
SOFTWARE UPDATE
1. Copy the 3 files for software update on the micro SD card;
Note: We recommend using a 1 or 2GB card
2. Insert the MicroSD Card into the camera
3. Insert the battery into the camera or plug it into a power source via the USB cable
4. Press and hold the Power/Navigation button
, the camera will beep
5. Release the button
when you see the LED blinking
6. Then press and hold Menu/OK
button
Note: The led indicator does not blink but remains lit.
7. Release the button
after you see the ISP icon on the screen
8. If the update was successful, the led indicator will turn off;
9. Remove the batteries or remove the power cord;
10. Reinsert the batteries and turn on the camera. Procedure completed.
Note: Do not interrupt the power supply while updating the software; otherwise, the camera
can only be turned on after a software update via a PC
USB CONNECTION
When the camera is connected via USB, press and hold the button
, the camera will beep
and the led indicator will light up; then the following interface appears
Press
and choose DC in or PC connection; press
to confirm the setting.
1. DC power supply
The camera enters the main interface of the Test mode
2. PC connection to read SD card
The interface below appears on the camera screen. Now you can read the contents of the
SD card on your PC.
Содержание HUNTING 2C
Страница 1: ...PNI HUNTING 2C Hunting camera...
