PNI escort HP 8001 ASQ, Руководство пользователя

Страница: 12 / 32

Maximum RF power 4W FM la 13.8Vdc
Modulation 85% la 90% (AM)
3KHz ±0.2 KHz (FM)
ANT impedance 50 Ohm
Current drain 2 A
3. Product description
1. MICROPHONE connector
: Connect the supplied
electric condenser microphone
to this connector, and then lock it via the ring nut.
2. UP KEY
: Press this key and channel NO. runs up.
3. DOWN KEY :
Press this key channel NO. runs down.
4. SQ knob :
The SQUELCH control allows to silent the receiver by cutting the
background noise. Turn the SQUELCH knob anticlockwise until the background noise
is cut. Rotate the SQUELCH knob clockwise (SQUELCH ON) to listen to the weakest
signals.
5. ASQ knob
: to increase the ASQ level rotate the knob clockwise, in this case the
background noise is reduced but also the received signal. Recommended: turn on the
radio CB with the ASQ knob on the left.
6. OFF/VOL :
This knob controls the radio ON and OFF as well as adjusts the volume.
If no signals are being received on the operating channel, it is suggested to turn on the
SQUELCH and adjust the volume to the desired level while listening to the background
noise.
When it is turned on by operating the Volume knob
，
the radio will remember the
channel, frequency, AM or FM used last time.