5
User manual
En
gli
sh
from the battery and fuel lines.
2. b. For batteries outside the vehicle:
• Attach the red (+) clip to the red (+) terminal of the battery.
• Attach the black (+) clip to the black (+) terminal of the battery.
Note: If you have reversed the polarity, the LED on the charger will light up.
3. Connect the mains plug to the AC mains supply.
4. After charging the battery, disconnect the charger from the mains supply.
Disconnect the charger from the engine block and then from the battery.
Battery charging
Select the required charging mode:
Normal battery
charging
Maintenance
charging
Winter
charging
Battery
recondition
Start/Stop
vehicles
Standard
vehicles
√* (
up to 12A)
√ (
0.8A)
√
√
√
√*
* Default charging modes
1. Select the vehicle battery type:
• Standard vehicles
that use lead acid battery (14.4V applied)
• Start/Stop
vehicles
that use AGM battery type (14.6V applied)
2. Press the arrow keys on the charger to select the icon
(Battery
charging). Then, press SET.
3. Press the arrow keys on the charger to select the icon corresponding to
the desired loading mode, then press the SET button.
•
-
Battery charging mode
Recommended mode for standard batteries and for charging at temperatures
higher than 5°C. Increases the battery voltage to 14.4V (standard vehicles)
or 14.6V (start/stop vehicles).
