PNC Pit Bull Safety Cover Скачать руководство пользователя страница 12

For help with installation or operation of this product, contact a PNC representative at 832-515-8583

 

12 

Care and Maintenance 

 

It is not necessary to remove your Pit Bull to clean if you generally wash your pit 

area from top to bottom. However, in order to get the maximum life from your Pit 
Bull Safety Cover, we recommend you follow the care and maintenance instructions 

below.  

 

Professional Netting Concepts LLC. suggests you use a bleach free soap, such as 
DAWN Dishwashing Liquid or Woolite Laundry Detergent and hot water. Both these 

products are a mild detergent that will not harm your cover. With a medium stiff 

brush, apply soap and water over the Pit Bull and scrub. Rinse thoroughly. 

 
Cornstarch or baby talc can be used to remove stubborn grease stains. Brush off 
loose dirt, cover the stain with cornstarch or baby talc, and leave on the grease spot 

over night. Then brush off the cornstarch or baby talc off. Most, if not all of the stain 

should disappear. However, if it is necessary repeat the process again.   

 
For a DEEP CLEAN you can remove your Pit Bull Safety Cover from the channel and 

take it to your nearest car wash. Use the foaming brush or high power washer to 

clean you Pit Bull Safety Cover. You may use the same process to clean your No-

Step labels. 

 

WARNING!!! 

 

NEVER USE strong cleaners, petroleum based products or bleaches (this includes 
Oxi-clean) Avoid using and harsh chemical or industrial strength cleaners. DO NOT 

use any cleaning agent that is a solvent based or solvent containing cleanser. These 

are typically called degreasers. The use of degreasers over time will fade or lesson 

the strength of the webbing material. DO NOT use any kind of hydrocarbon solvent, 
it was found to weaken the webbing considerably.  

 

 

 

 

 

The information contained in this manual is the exclusive property of Professional Netting Concepts, L.L.C. and 
protected by copyright and other proprietary rights. Nothing contained in this manual may be reproduced, 
distributed or edited in any manner without the prior written authorization of Professional Netting 
Concepts, L.L.C. No reproduction is permitted without specific written authorization. You may not 
distribute, modify, transmit, reuse, report, or use the contents of this information for public or commercial 
purposes, including text, images, prices or other information without Professional Netting Concepts, L.L.C. 
written permission. 

Содержание Pit Bull Safety Cover















Отзывы: