PMX PARKES Series, Руководство пользователя

Страница: 5 / 12

4
Hot Water System
This is a storage system which must be primed before turned on. Simply fill both
water tanks, turn on both pumps and run hot tap until water comes through.
●
240V . For mains power only. Check tank is primed and 15A extension lead
is connected to van. Select 240v.
●
Gas . As above ensure tank is primed and 240v switch is off. Check gas bottle
is connected and open. Flick gas switch to on. Automatic igniter will start.
Please note if model has external door over HWS this door must be opened
to operate HWS.
Shower
Your shower will operate just like at home. There is even an extractor fan to
help get steam out. Once hot water has heated up you are ready to go.
Remember to have both pump switches on.
Shower Waste
The van is fitted with an outlet that a caravan waste water hose can be
attached to. Depending on model there may also be a waste holding tank.
Simply purchase a waste hose to connect and run to suitable drainage point.
Toilet Cassette
Lovely topic but done right is no fuss. Prior to using try some fresh water only
tests before adding Chemicals. You can just have chemical in waste tank or
use approved chemical in flushing tank as well.
Operation:
1. Fill flushing water tank with clean water. Use cap extender when filling.
2. Place mixed chemical into the cassette waste tank as per bottle instructions.
3. Slide waste tank into slot & lock in place.
Time To Empty: Don’t wait till full. Use dump zones.
1. Remove cassette from slot, extend handle and wheel to dump zone.
2. Swing out dump tube, remove cap and poor solution into dump point. The
small button on top allows air into cassette to speed process. Clean and
replace into slot.