Attach Projector Mount to Wall
1
Ÿ
READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING YOUR EQUIPMENT.
Ÿ
INSTALL THE MOUNT IN A SUITABLE LOCATION USING FIXING WHICH ARE APPROPRIATE FOR THE
WALL MATERIAL AND STRUCTURE. CONSULT A QUALIFIED BUILDER IF YOU ARE IN ANY DOUBT AS
TO THE STRUCTURAL INTEGRITY OF THE WALL.
Ÿ
DO NOT ATTEMPT TO ALTER OR MODIFY ANY PART OF THE WALL MOUNT OR IT'S ATTACHMENTS.
Ÿ
DO NOT USE IF ANY PARTS ARE BROKEN OR APPEAR TO BE DAMAGED.
Ÿ
TIGHTEN ALL BOLTS AND FIXINGS SECURELY. ONLY USE FIXINGS PROVIDED WITH THIS BRACKET.
Ÿ
DO NOT MOUNT YOUR PROJECTOR NEAR TO SOURCES OF HEAT OR MOISTURE.
Ÿ
ALWAYS HAVE A MINIMUM OF TWO PERSONS TO INSTALL THE PROJECTOR ONTO THE MOUNT.
MOUNTING INSTRUCTIONS FOR
UNIVERSAL SHORT THROW PROJECTOR MOUNT
MODEL No.
PMVSHORTTHROW
SVPMST0001
AVPMSTSHORT
Max Weight Loading 15kgs
1
Secure Boom Arm To Wall Plate
2
For ease of installation mount bracket on wall using position 1
and mark other positions using a spirit level. Then remove
fixing from position 1, remove bracket and drill other positions
Use Fixings suitable for your type of wall construction.
Use All available fixing points.
If in any doubt of the suitability of the wall, it's construction or
what type of fixings to use, consult a qualified builder or installer.
CAUTION NOTE!
This mount is designed to take projectors up to a
weight of 15Kgs. For safety reasons the mount
has been tested with a dead weight loading of
75Kgs. It is recommended that if the installation is
at risk of being subjected to greater loads then
you should additionally tether the mount to the
ceiling using the tether point (highlighted below).
The tether point uses an M6 thread which can
accept any M6 fixing such as an eye bolt or hook.
Tether Point
a
Universal Projector Fixing Kit
D
- M3 x 10mm
F
- M4 x 10mm
H
- M5 x 10mm
J
- M6 x 10mm
L
- M3 Washer
N
- M4 Washer
E
- M3 x 25mm
G
- M4 x 25mm
I
- M5 x 25mm
K
- M6 x 25mm
M
- M5 Washer
O
- M6 Washer
P
- M5 x 10mm
Q
- M5 x 5mm
R
- M6 x 15mm
Also Required
S
- Extension Arm
T
- M5 x 10mm
x4
x4
x4
x4
x4
Projector Mount Assembly Kit
C
- M6 x 12mm
x2
A
- M8 x 16mm
B
- M8 / M6
x4
x4/x3
