PMV Mounts PMVMOUNT1PA Скачать руководство пользователя страница 3

Страница: 3 / 4

Continued...

Position both tilt and tilt locking washers and insert

large M8 x 75mm bolt.

Note:

This is the tilt adjustment mechanism.

Attach projector mount to pole section

Remove both tilt and tilt lock washers and large

M8 x 75mm bolt from bottom of the Pole adapter.
Position the hooks on the projector mount over the
corresponding parts of the lower moulding.

Содержание PMVMOUNT1PA

Страница 1: ...ns carefully before installing your equipment Install the mount in a suitable location using fixings which are appropriate for the ceiling material and structure Consult a qualified builder if you re...

Страница 2: ...ojector mount 2 Bx4 Cx4 Ex4 Fx4 or Attach projector mount and struts to all threads 3 Note Use the appropriately sized fixings from the fixing kit Use spacers as required not always necessary Alternat...

Страница 3: ...m bolt Note This is the tilt adjustment mechanism Attach projector mount to pole section 4A Remove both tilt and tilt lock washers and large M8 x 75mm bolt from bottom of the Pole adapter Position the...

Страница 4: ...nal adjustment Tilt Adjusted via the tilt locking mechanism between the pole section and projector mount Loosen retaining bolt and tighten at desired angle Yaw Fine adjusted via the projector mount Un...