Wiring/Cable Management
Tie Strap
Tie Strap
Connect all cables securely to dock
connections, and use tie straps to
secure cables to the built-in slots on
the mounting/interface plate.
PMT VESA 75mm x 75mm
mounting/interface plate
Wiring Tip:
PMT does not recommend relying on a
cigarette socket adaptor for powering
vehicle docks. We recommend hard wiring
using a good clean ground direct from the
vehicle battery (-) post, and (+) supply from
a fused 12v location also directly from the
vehicle battery. All Peripherals connecting
to the docking station should get power
and ground from the same location as the
dock.
www.precisionmounts.com/installation-instructions.html
for a copy of our general wiring and
troubleshooting guide
