PMI SVM-10, Руководство пользователя

Страница: 27 / 42

SVM-10™ Manual
27
Operation Chapter 3
3.1 INTRODUCTION
3.1.1 General
This chapter contains information concerning system operation and front panel
keystroke commands for your Scanner. Explanations of the front panel displays and
menu selections are included.
3.2 CONTROL AND PRESENTATION
3.2.1 General
The following paragraphs are intended to familiarize you with the front panel controls
and commands along with any other day-to- day operating controls. The Scanner
presents information through the display and the WinScan™ program. The front panel
uses a LCD display and four key membrane switch to allow operator inputs to lead you
through instrument setup.
3.2.2 Operator Controls
All controls are on the front panel of the Scanner. On the next few pages, the figures
illustrate and define all of the Operator accessible Scanner controls. The initial Scanner
display is illustrated in Figure 3-1 and explained in the following Paragraphs.
A. LCD menus and keypad
Like WinScan™, the liquid crystal display (LCD) on the Scanner faceplate also uses
menus. Choices are made using the four keys on the Scanner’s faceplate:
LEFT ARROW ( ): Moves cursor to the left across a menu bar.
RIGHT ARROW ( ): Moves cursor to the right across a menu bar. SET
KEY : Selects the highlighted option.