RespiraSense
™
Instructions For Use
RespiraSense
™
PDS-801-007 Revision 2
Page
21
of
77
Table 5 Features of the Patient Information Panel
Reference
Function
Description
1
Patient ID
Displays Patient identifier.
2
Priority Patient
Toggle
Allows user to toggle Lobe as Priority. Priority patients are
shown at the top of the list. Shown in Figure 6 in deactivated
state.
3
Respiratory Rate
Icon
Shows what is being measured- respiratory rate.
4
Latest Respiratory
Rate (RR)
Shows average RR of patient over latest averaging window.
5
Status
Information
Displays low priority alerts relating to Lobe: Device Error, Low
Battery, Non-Default Settings and/or Sensor Disconnect.
6
Latest SpO2
Measurement
Displays SpO2 measurement of patient.
7
Alarm Thresholds Upper and Lower Alarm Thresholds Set for patient.
In the event of an alarm scenario, the Patient Information Panel will flash Red.
In Bluetooth mode, in the event of a RS Device leaving scan range, the Patient Information Panel will
fade to grey to indicate that the application is no longer receiving data from that patient. After 15
minutes the patient will not be visible on the dashboard.
Any RS Device which is currently displaying an alarm status will be placed at the top of the
dashboard.
Respiratory Rate Measurement - Function Screen
Successfully requesting patient data from the Lobe results in the display of the RR Measurement
Function screen as shown in Figure 7. This screen displays patient and device status information and
allows the user to browse the patient’s RR trend graph and alter Lobe settings as required.
