PMC MN-06001, Руководство пользователя

Страница: 14 / 66

PMCA-20
Manual
14
INSTALLATION
WARNING! Use suitable protection and follow the recommendations in
the Safety Information enclosed and provided by material suppliers when
installing or working with the proportioner.
Inside the console is a Terminal Strip for connecting the incoming power
cable (not supplied). Use appropriate AWG wire. The electrical connection
of the proportioner must be carried out by a qualified electrician.
NOTE! To ensure the PMCA-20 Series Proportioner works correctly, the
electrical supply must meet the specifications indicated on the Serial
Number Placard affixed to the Electric Console.
CAUTION! Make sure the power cable is disconnected from the main
power source before connecting to the Terminal Strip in the Console.
Follow the recommended procedure in the indicated order to install the proportioner:
1. Insert the main power cable by passing it through the strain relief at the bottom of
the Electrical Console and connect as shown in the above diagram.
2. Fill the Lube Reservoir (plastic bottle) with PMC pump lube or equivalent. It is not
necessary to prime the system when using size 60 pumps. It is recommended to
prime the lube system when using size 40 pumps.
L1 L2
1 phase x (208- 230 Volt)